EMWRAPS covered this C8 Corvette in full body color PPF, UNITY USA's "Under the Star" metallic grey, and installed a full carbon fiber aero kit at our Seattle shop in SODO. The owner wanted a one-of-a-kind look that sharpened the car's lines while protecting the original paint from Pacific Northwest roads. Color PPF did both in a single film.
- Vehicle: Chevrolet C8 Corvette
- Service: full body color PPF, carbon fiber aero kit installation, light blue pinstripe on the aero
- Film: UNITY USA "Under the Star", a deep metallic grey with heavy flake
- Aero: carbon fiber front splitter, rear wing and side intake vents
- Extras: chameleon windshield tint, aftermarket wheels with carbon fiber barrels
- Shop: EMWRAPS, Seattle (SODO)
Why did the owner choose color PPF over a vinyl wrap?
Color PPF changes the color and protects the paint at the same time. Unlike vinyl, color PPF is a thick, durable urethane film that absorbs rock chips and road debris the way clear PPF does.
"Under the Star" is a deep, sparkly metallic grey with a large amount of flake that comes alive in the light. It gives the C8 a texture and presence that paint can't easily match, while the factory paint stays protected underneath.
How do you install color PPF on a C8 Corvette?
A full body of color PPF on a car as complex as the C8 Corvette takes careful prep and panel-by-panel work. Our process:
- A multi-stage decontamination wash and paint prep, so the surface is clean for good adhesion.
- Panel-by-panel installation, stretching and contouring the film around the C8's sharp creases and vents.
- Tucking every possible edge, so no original color shows and the film doesn't lift over time.
The goal is a seamless, paint-like finish. With a color film, an edge left short shows the old color, so edge work matters even more than with clear PPF.
What carbon fiber parts went on the C8?
The aero kit added a front splitter, a track-inspired rear wing and new side intake vents, all in lightweight carbon fiber. Our team handles aftermarket parts installation in-house, and every part was fitted with OEM-level alignment and secure mounting.
To tie the build together, we added a subtle light blue pinstripe to the aero that matches the car's large brake calipers.
What finishing details complete the build?
The details carry the look through the whole car. The factory interior, with its Alcantara steering wheel and red accent stitching, set a high bar that the exterior now matches. A chameleon windshield tint adds a hint of iridescent color, and aftermarket wheels with carbon fiber barrels finish the stance.
How much does color PPF cost on a Corvette?
Full body color PPF at EMWRAPS runs $6,800–$10,000+. Where a car falls in that range depends on its size, the color chosen and how complex the bodywork is, and a C8's vents and creases add work. Paint condition matters too, and every car gets its own quote.
Frequently asked questions
Is color PPF the same as a vinyl wrap?
No. Color PPF and vinyl both change a car's color, but color PPF is a thick, self-healing urethane paint protection film, while vinyl is mainly cosmetic. Color PPF absorbs rock chips and light scratches like clear PPF, so the paint underneath stays protected.
How long does color PPF last?
Color PPF from the major brands carries a manufacturer warranty of 7 to 10 years, depending on the brand. Proper care helps it reach that life: wait 48 hours before the first wash, then hand wash with a pH-neutral shampoo.
Can color PPF be removed from a Corvette?
Yes. Color PPF comes off without harming the factory paint when it is removed properly. That means a C8 owner can return to the original color later, and the paint under the film has been protected the whole time.
Can you add carbon fiber aero to a car with color PPF?
Yes. On this C8 Corvette, EMWRAPS did both in one build: full body color PPF plus a carbon fiber front splitter, rear wing and side intake vents, each fitted with OEM-level alignment and secure mounting. A light blue pinstripe on the aero then tied the parts to the car's brake calipers.
Plan your build at EMWRAPS
Color PPF, a custom vinyl wrap or aftermarket parts, our Seattle team can plan the whole build with you. Visit us at 1900 Airport Way S #103, Seattle, WA 98134, get a quote through the quote form or call (206) 383-5328.
