Corvette Z06 carbon wing, front lip and canards

A white C8 Corvette Z06 gets a carbon fiber wing, front lip and canards from Racing Sport Concepts, installed at our Seattle shop.

White Corvette Z06 with a carbon fiber wing, front lip and canards outside the EMWRAPS shop in Seattle

EMWRAPS installed a carbon fiber rear wing, front lip and canards from Racing Sport Concepts on this white C8 Corvette Z06 at our Seattle shop in SODO. The parts give the Z06 a sharper, track-ready look while keeping the factory body and paint as they are, with each piece fitted and aligned to the car.

  • Vehicle: Chevrolet Corvette Z06 (C8), white
  • Parts: carbon fiber rear wing, front lip and canards
  • Parts maker: Racing Sport Concepts
  • Service: aftermarket parts installation
  • Shop: EMWRAPS, Seattle (SODO)
White Corvette Z06 with a carbon fiber wing, front lip and canards outside the EMWRAPS shop in Seattle

What did EMWRAPS install on the Z06?

We installed three carbon fiber aero pieces made by Racing Sport Concepts: a rear wing, a front lip and a pair of canards. Together they change the car's profile from the front splitter line to the tail, and the exposed carbon weave contrasts with the white paint.

The front lip runs along the bottom of the front bumper. The canards sit at the front corners, ahead of the front wheels. The wing sits on the rear deck, where it is the first thing people notice from behind.

Carbon fiber front lip and canard on a white Corvette Z06

Why add carbon aero parts to a Corvette Z06?

Most owners add carbon aero to sharpen the look and make the car read as more track-focused. The Z06 is already built around a race-bred chassis, so a carbon wing, lip and canards fit its character rather than fighting it.

Carbon fiber is the usual material for these parts because it is stiff and light, and the visible weave is part of the appeal. On a white car like this one, the black carbon outlines the edges of the body.

How does an aftermarket parts install work at EMWRAPS?

A parts install starts with checking the parts against the car before anything is fitted. Every piece is test-fitted, aligned to the body, and then secured, so the gaps are even and the parts sit where they should.

For a front lip and canards, alignment matters because they sit low and frame the bumper: a few millimeters off shows from across a parking lot. For a rear wing, the mounting has to be solid and square to the car. We take the time to get those details right, because a carbon part is only as good as the way it sits on the car.

Carbon fiber rear wing on a white Corvette Z06

Can you protect carbon parts and the paint around them?

Yes. Paint protection film (PPF) is a common pairing with new aero parts, especially on the front of the car, where rock chips land. Clear, self-healing PPF from UNITY USA, STEK, SunTek or 3M protects the paint from chips, scratches, bug acid and UV, and it can be removed later without harming the factory paint.

PPF at EMWRAPS runs from about $1,200 for a partial front up to $6,000–$8,000+ for full body, depending on the car and coverage. A ceramic coating over film runs $500 to $800. The final price depends on the vehicle's size, shape and paint condition, and every job comes with a quote. See our paint protection film options and the track pack, which adds coverage to the areas that take the most hits on cars driven hard.

What does aftermarket parts installation cost?

Aftermarket parts installation is quoted per project. The price depends on the parts, how they mount, and whether any other work, such as PPF or a wrap, is done at the same time. Send us the car and the parts you have in mind through the quote form and we'll come back with a price and timing.

Our parts and installation page shows more of the body kits and carbon parts we fit, and our post on a Ferrari F8 Tributo with a carbon aero kit covers another full carbon install. Our C8 Corvette in UNITY USA color PPF with carbon aero pairs carbon parts with paint protection.

Carbon fiber wing upright and blade on a white Corvette Z06, rear view

Frequently asked questions

What carbon parts did EMWRAPS install on this Corvette Z06?

EMWRAPS installed a carbon fiber rear wing, a carbon fiber front lip and a pair of carbon fiber canards on this white C8 Corvette Z06. All three parts are made by Racing Sport Concepts. The install was done at the EMWRAPS shop in SODO, Seattle, and each part was fitted and aligned to the car.

Does EMWRAPS install parts customers buy elsewhere?

EMWRAPS installs aftermarket parts such as wings, lips, canards, side skirts and full body kits, including parts made by brands like Racing Sport Concepts. Tell us which parts you have or plan to buy when you request a quote, and we will confirm the install and the price for your car.

Should I add PPF after installing carbon aero parts on a Corvette?

Adding PPF after an aero install is a good idea on a car that is driven often, because the front bumper, hood and front fenders take most rock chips. Clear, self-healing PPF protects that paint and comes off later without harming it. A full front or track pack is the usual choice on a Corvette that sees highway or track miles.

How much does it cost to install a carbon wing and front lip?

Installing a carbon wing and front lip is quoted per project at EMWRAPS, because the price depends on the parts, how they mount and any extra work done at the same time. Send the car, the parts and photos through the quote form, and we reply within 24 hours with a price and dates.

Get a quote for your Corvette

Planning aero parts, PPF or both for your Corvette? Get a quote through the quote form or call (206) 383-5328.

See this Z06 on our Instagram.

All postsBook this service

Want one like it? Tell us about the car. We reply within 24 hours.