EMWRAPS wrapped this hood in custom anime artwork featuring Xue Hu at our Seattle shop in SODO. It is a partial itasha: one panel, one statement illustration with vibrant colors and intricate detail. A printed vinyl itasha hood like this runs $580–$720 at EMWRAPS, depending on hood size, and it is a great entry point into anime wraps.
Key facts
- Service: custom anime hood wrap, a partial itasha
- Artwork: original Xue Hu illustration
- Coverage: hood only
- Price range for an itasha hood: $580–$720 in printed vinyl, bigger hoods higher
- Shop: EMWRAPS, Seattle (SODO)
Why put itasha art on the hood?
The hood is usually the most visible panel on a vehicle, so it is the natural place for a statement piece. It faces you as the car approaches, it is what people photograph at car meets, and it is a large, mostly flat surface that holds an illustration without many breaks.
The Xue Hu illustration uses vibrant colors and intricate details that pull the eye from any angle. A single hood like this proves a focused, well-executed partial wrap can have as much impact as a full car wrap.
How much does an anime hood wrap cost in Seattle?
At EMWRAPS, an anime hood wrap in printed vinyl costs $580–$720. The bigger the hood, the higher the price. If you want the art on self-healing film instead, a printed PPF hood runs $800–$1,200, because printed PPF costs about 50% more than printed vinyl. The final price depends on the vehicle and the artwork, and we confirm it in a quote.
That makes the hood the most accessible itasha. It gives you a custom character piece for a fraction of a full body build, which at EMWRAPS runs $4,000–$8,000+.
Printed vinyl or printed PPF for an itasha hood?
Choose printed vinyl for the lower price and easy changes later; choose printed PPF if you also want paint protection.
- Printed vinyl: the art is printed on cast vinyl and laminated for UV and scratch protection. It protects the paint under it and comes off without harming factory paint when removed properly. Vinyl wraps generally last 5–7 years with good care.
- Printed PPF: the art is printed on self-healing UNITY USA TPU film with a clear or white base and a gloss or Stealth (satin-matte) top layer. It goes on in one install with no raised edges, light scratches heal with heat, and the film carries a 10-year warranty.
A hood takes more rock chips than any other panel, so printed PPF is worth considering if you drive a lot of highway miles.
How is a hood itasha made?
Design, print and install all happen in-house at EMWRAPS.
- Design. The artwork is laid out for your hood's shape and edges, so the character sits where it reads best.
- Print. The approved design is printed in high resolution.
- Laminate. A laminate goes over the print for UV and scratch protection.
- Install. The hood is wrapped as one panel with the edges wrapped around for a clean finish.
Can you start with a hood and add more later?
Yes. A hood is a good first step, and the design can grow into a half body (one side plus the hood, $2,500–$4,000) or a full body build later. Our anime car wrap guide explains each level, and the Gundam Sinanju itasha shows what a full build looks like.
Frequently asked questions
How much does an anime hood wrap cost?
An anime hood wrap at EMWRAPS in Seattle costs $580–$720 in printed vinyl, with bigger hoods at the top of that range. A printed PPF anime hood costs $800–$1,200 because the self-healing film runs about 50% more than vinyl. The final price depends on the vehicle and the complexity of the artwork, and you get it in a quote.
Will an anime hood wrap damage the paint?
A properly installed anime hood wrap does not damage factory paint. The printed vinyl covers and protects the hood's paint while it is on, and vinyl comes off without harming factory paint when it is removed properly. That makes a hood itasha a low-commitment way to try anime wraps, since you can remove it or change the character later.
How long does an itasha hood wrap last?
A printed vinyl itasha hood with laminate generally lasts 5–7 years with good care. Hand washing with a pH-neutral shampoo and keeping pressure washer nozzles off the edges helps it last. A printed PPF hood on UNITY USA film carries a 10-year film warranty and heals light scratches with heat, for owners who want a longer-lasting hood.
Start with a hood
A hood is the easiest way into itasha, and it can grow into a full build when you are ready. Send your character and car through the quote form and we reply within 24 hours, or call EMWRAPS at (206) 383-5328.
-768x512.jpg?prefix=cms)
